Our company manufactures fencing meshes on Pos 1, 2, 3 from galvanized and non-galvanized wires. The quantity of zinc used in plating of the wires of these meshes, produced with the utilization of the hot dipping galvanizing technique, is minimum 60 gr./m2 and they can be found anytime in our stock. The mesh production of different dimensions, spacing and dia. can be done, in diameters of 2.0 - 2.5 - 3.0 - 4.0mm. and, dimensions varies min. 1.5m. / max. 4.0m. length and min. 0.35m. / max. 1.2m. width but again the order must be above a certain quantity.